PBLK-415
Spud gun Offset Coaxial Parts: Offset Coaxial Kit 415
Breech loading and chamber vent solution!
At the core of our featured breech loaders is the Sureshot offset coaxial kits. The OCK series allow the barrel to be offset and run inside the chamber allowing breech loading and a chamber vent/mix tube. The key to high performance is consistent air/fuel blend inside the chamber prior to combustion and adequate exhaust venting when the breech is open between rounds. With these parameters in mind the Sureshot OCK series is the only solution.
The OCK-415 kit is designed to work with 4" schedule 40 or 80 PVC couplings* and pipe* for the chamber, 1.5" schedule 40 or 80 PVC pipe* for the barrel and 1" schedule 40 or 80 PVC pipe* for the vent tube.
Included with this kit:
PLEASE NOTE: This kit requires a moderate skill level to assemble.
*For use with Pressure rated pipe and fittings.
**Photo does not represent pre-wired fan/switch/battery lead assembly. Actual assembly come pre-wired.
Thanks for shopping at our ultimate spud gun site
MADE IN USA
|