Spud gun fuel components: Fuel Metering Device / Regulator Combo

FREE CONCOA REGULATOR INCLUDED WITH PURCHASE OF FMD-101*

Unleash the maximum potential of your spudgun by dialing in the air/fuel ratio!

Ultimate spud gun is proud to offer Sureshot's Fuel Metering Device (FMD-101) and CONCOA regulator combo. Utilized on our fully assembled BL-520 and BL-415 the FMD-101/CONCOA regulator combo works with 1LB MAPP gas or Propane tanks. The FMD-101 features the Sureshot modular component interface and connects with any of the MRS ring kits or Perpendicular mount PM-101.

Here's how the FMD-101 works: Regulated, pressurized gaseous fuel enters the device when the action is pulled back, when the action is pushed forward the metered gas is injected into the chamber of your spudgun through a one way safety valve. Using the CONCOA regulator to set pressure, the FMD-101 will supply a lifetime of precisely metered injections.

Fuel Metering Device (FMD-101)

Specifications

• 4.9 cubic inch metering volume
• Mil spec. Billet 6061 T6 aluminum body construction

Features

• Twin piston design
• Modular component interface

Included:

• Fuel metering device
• (4) 1/4 -20 x 5/8” black oxide steel socket cap screws
• 1/8" NPT extension
• 1/8" NPT street tee
• 1/8" NPT pressure gauge
• 1/8" NPT 1/4" hose nipple
• 1/8" NPT 1/4" hose nipple
• 1/4" NPT 1/4" hose nipple
• 1/4" fuel safety check valve
• 1/4" street elbow
• 1/4" fuel hose (30")
• 1/2" hose clamp
• 1" knob

Regulator

CONCOA Propane / MAPP gas regulator. Modified specifically to ultimate spud gun specifications. This compact device will provide a regulated gas source (0-40PSI) for your Sureshot fuel metering device, FMD-101. This regulator has an internal flow limiter which prevents "pressure creep" from repeated usage.

Anodized aluminum construction

Specifications

• 0-40 PSI regulated range
• 1/4" Hose barb output

Thanks for shopping at our ultimate spud gun site

MADE IN USA

*while supplies last